BHMGQ - ANAEROBIC ADHESIVE/SEALANT GRADE CV
- MSDS: BHMGQ
- Manufacturer: SAF T LOK CHEMICAL CORP
- Product Name: ANAEROBIC ADHESIVE/SEALANT GRADE CV
- National Stock Number: 8030-00-181-2330
Product Identification
Product ID:ANAEROBIC ADHESIVE/SEALANT GRADE CV
MSDS Date:06/01/1989
FSC:8030
NIIN:00-181-2330
MSDS Number: BHMGQ
Responsible Party
DOWNERS GROVE, IL 60515
US
Emergency Phone: (312) 971-2001
Info Phone: (312) 971-2001
Cage: SAFTL
Contractor
Telephone: 708-971-2001
Cage: SAFTL
Ingredients
METHACRYLIC ESTER MONOMERS
Fraction By Weight: 25-70%
ACGIH TLV: NA
ORGANIC PEROXIDE
Fraction By Weight: < 5%
ACGIH TLV: NA
SACCHARIN (SARA III)
CAS: 81-07-2
RTECS: DE4200000
Fraction By Weight: < 1%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ORGANIC PEROXIDE HAS BEEN REPORTED TO
CAUSE TUMORS IN EXPERIMENTAL ANIMALS WHEN INJECTED UNDER THE SKIN.
THE LOW CONCENTRATION (<5%) CONTAINED IN THE PRODUCT SHOULD
PRESENT NO DANGER WHEN USED PROPE RLY UNDER NORMAL CONDITIONS.
Explanation of Carcinogenicity:SACCHARIN, IN LG AMTS/PROLONG PERIOD,
REPORTED TO CAUSE TUM-ORS IN EXPER ANIMALS, CONCENT IS <1%,
SHOULDN'T BE DANGEROUS
Effects of Overexposure:PROLONGED SKIN CONTACT MAY CAUSE DERMATITIS IN
SENSITIVE INDIVIDUALS.
Medical Cond Aggravated by Exposure:NA
First Aid
First Aid:SKIN AND EYES: FLUSH WITH WATER. INGESTION: KEEP CALM, REMOVE
TO FRESH AIR. DO NOT INDUCE VOMITING. OBTAIN MEDICAL ASSISTANCE.
Fire Fighting
Flash Point Method:TCC
Flash Point:200 F/ 93 C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Accidental Release
Spill Release Procedures:PROVIDE GOOD VENTILATION. AVOID EYE & SKIN
CONTACTSOAK UP SPILL WITH EARTH, SAND, OR ABSORBENT PRO- DUCT
(ZORBAL), RECOVER IN CONTAINER.
Handling
Handling and Storage Precautions:STORE BELOW 80 F FOR PROLONGED SHELF
LIFE. STORE IN ORIGINAL CONTAINER.
Other Precautions:AVOID PROLONGED SKIN CONTACT
Exposure Controls
Respiratory Protection:NOT NORMALLY NECESSARY, BUT PRODUCT SHOULD BE
USED IN AREAS OF GOOD VENTILATION
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NA
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:> 300 F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:< 5 @ 30 F
Vapor Density:NA
Spec Gravity:1.1
Evaporation Rate & Reference:NA
Solubility in Water:PARTIAL
Appearance and Odor:BLUE LIQUID, MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AND REDUCING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CO, CO2, NITROUS OXIDES
Conditions to Avoid Polymerization:TEMPERATURES OVER 120 F
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH STATE, FEDERAL &
LOCAL ANTI-POLLUTION & WASTE DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.